ATTU 30A 2-5S ESC is designed for superior performance in FPV Racing.
Suppot regular 1-2ms pulse width input, as well as Oneshot125(125-250us), Oneshot42 (41.7-83.3us), Multshot(5-25us), Dshot150, Dshot 300 and even Dshot600 and automatically detected by the ESC.
High quality N-FET, half-bridge drive and PCB specialized for cooling, only flashed with BLHeli_S firmware.
Pre-flashed with the settings below.
Advantages:
- High-temperature resistant
- Fast heat dissipation
- Quick response
- Strong explosive power
- High reliability
- Easy to handle
- It’s a reliable ESC designed for high class racing ESC
Specifications for Each ESC:
- Firmware: BLHeli_S V16.6 A-H-20
- Max continuous load: 30 amps
- Burst Current: 40A / 10sec
- Lipo Cells: 2 to 5 cells
- MCU: SILABS EFM8BB2 48MHz
- BEC: No
- One ESC Weight: 3.6g (only board) 6.5g (total with wires and heat sink)
Dimensions for Each ESC:
- PCB size: 26mm L*14.5mm W
- ESC height: 6mm
- Signal wire: 150mm
- Power wires: 100mm
Parameters:
| Max continuous load | 30 amps |
|---|---|
| Burst Current | 40A / 10sec |
| Lipo Cells | 2 to 5 cells |
| BEC | No |
| ESC weight | No |
| PCB size | 26mm L*14.5mm W |
| ESC heigh | 6mm |
| Signal wire | 150mm |
| Power wire | 100mm |
