Lots of Spaz Stix artist’s know that most paint colors are semitransparent and need to be backed. That’s why Spaz Stix Paints provides you with our Solid White Backer to keep your fluorescents and solid colors BRIGHT and bleed-through free.
Every color should be backed, always – especially if you want a paint job that looks great! Otherwise your yellow and blue paint scheme may turn out to be shades of green.
White backer will keep you colors as you intended while brightening them up and never dulling them out.
Solid White Instructions:
Use Spaz Stix Solid White as a color or backer for previous color coats.
For best results use Spaz Stix Surface Pre-Prep #SZX90059 before painting to keep paint jobs swirl and fingerprint free. Apply as a base coat or use as a backer to Spaz Stix Fluorescent Colors.
Seal and protect with Spaz Stix Ultra Shine Clear Acrylic Enamel SZX90109 Clear Coat and Nitro Fuel protectant. Allow color coats to dry at least 20 minutes before applying next color.
1. Apply at room temperature and shake for one minute prior to use.
2. Hold can at least 8" to 10" from spray surface and apply in thin layers with smooth continuous motions until desired coverage is achieved. Shake can occasionally.
3. Clean valve when finished by holding can upside down and spraying for two seconds. Wipe residue away from spray tip.
WE CANNOT SHIP THIS ITEM INTERNATIONALLY DUE TO SHIPPING REGULATIONS
