JST-6 - Parallel Charging Adapter for 6 Lipos
Stop spending so much time charging and spend more time flying! With the JST-6 you can charge up to six lipos at one time!
Perfect for charging LiPos that fit:
Blade 120SR
Blade mQX
Any other single cell battteries utilitizing JST-6 connectors
HOW THE JST-6 WORKS: This adapter is designed to allow you to connect up to six LiPo batteries with the same capacity with JST plugs to the LiPo charger of your choice.
For example, if you connect three of our 3.7V 600mAh 35C lipos to the JST-6, your charger will essentially see just one 3.7V 1800mAh battery. Simply set your charger to 1S (3.7V) and 1.8A (a 1C charge rate), and you'll be able to charge those three batteries in the time it would normally take to charge just one.
Important notes: All batteries connected to the JST-6 must have the same nominal voltage and number of cells. Connecting batteries of different nominal voltages or cell counts can severely damage your batteries or charger, or even result in fire.
Do not connect a fully charged battery to a group of discharged cells. This can cause a large amount of current to flow from one battery to the others and damage the batteries or the JST-6.
Lectron Pro™ 3.7V 1000mAh 30C Lipo Battery with JST Connector
This Lectron Pro™ 3.7V 1000mAh 30C lipo battery is a perfect fit for all versions of the Dromida Vista and Dromida Ominus, including the FPV versions. Get up to 40% more flight time! Features a JST/BEC connector on the discharge leads.
Dimensions:
Length: 65mm (2.56 in.)
Width: 23mm (0.91 in.)
Height: 7mm (0.28 in.)
Weight: 24g (0.85 oz)
