Modern street racing's roots go back to Woodward Avenue, Michigan in the 1960s when the three main Detroit-based American car companies were producing high-powered performance cars. A private racing venue was not always available, and therefore the race would be held illegally on public roads.
The DR10 Drag Race Car is based on the 9-time R.O.A.R. Short Course National Championship winning trucks. The DR10 features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as our ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box.
- Four (4) AA batteries (#ASC302 Reedy AA Alkaline) used in the transmitter
- NiMH or LiPo battery with High Current T-Plug (#ASC724 Reedy 7-cell WolfPack or #ASC751 Reedy WolfPack LiPo)
- Charger for battery used (#ASC27201 Reedy balance Charger - good for LiPo, LiFe)
- (1) DR10 Drag Race Car RTR
- (1) 2.4GHz 2-channel radio
- (1) High-torque, metal-gear Reedy servo
- (1) Reedy Brushless Speed Control
- (1) Product Manual
Factory-finished two-piece Reakt drag race body with rear spoiler
Reedy Speed Control
Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo
Coil-over Shocks
Aluminum 12mm big bore coil-over shock absorbers
Wheelie Bar
Three-position wheelie bar with optional large wheels
Turnbuckles
Rugged steel turnbuckles for adjustable camber and front toe-in
Receiver Box
Water-resistant enclosed receiver box
CVA Driveshafts
Rear CVA driveshafts for more reliability
Drag Race-inspired Wheels
Lightweight drag race-inspired wheels with high-grip rear drag slick tires
SPECIFICATIONS:
Approximate Assembly Time No assembly required
Ball Bearings 18 precision, rubber-sealed ball bearings
Batteries 2S-3S LiPo (sold separately)
Battery Dimensions L, W, H: 5.5 x 1.8 x 0.96" (139 x 47 x 24.5mm)
Charger LiPo compatible (sold separately)
Chassis Low center-of-gravity molded composite
Completion Level Ready-To-Run
Drivetrain RWD
Internal Gear Ratio 2.6:1
Length 24" (609.6mm)
Motor Type 3300kV brushless motor, Brushless
Radio 2.4GHz 2-channel radio system with DVC (Dynamic Vehicle Control) receiver and gyro
Scale 1/10
Servos High-torque, metal-gear Reedy servo with spring style servo saver
Shock Type Aluminum 12mm big bore coil-over
Suspension Adjustable suspension geometry
Tire Tread Slick/Drag Tires
Vehicle Type Drag Racing Car, Dragster
Water-Resistant Yes
Weight 10.70" (272mm)
Wheelbase 12.68" (322mm)
Width 10.7" (272mm)
Approximate Assembly TimeNo assembly requiredBall Bearings18 precision, rubber-sealed ball bearingsBatteries2S-3S LiPo (sold separately)Battery DimensionsL, W, H: 5.5 x 1.8 x 0.96" (139 x 47 x 24.5mm)ChargerLiPo compatible (sold separately)ChassisLow center-of-gravity molded compositeCompletion LevelReady-To-RunDrivetrainRWDInternal Gear Ratio2.6:1Length24" (609.6mm)Motor Type3300kV brushless motor, BrushlessRadio2.4GHz 2-channel radio system with DVC (Dynamic Vehicle Control) receiver and gyroScale1/10ServosHigh-torque, metal-gear Reedy servo with spring style servo saverShock TypeAluminum 12mm big bore coil-overSuspensionAdjustable suspension geometryTire TreadSlick/Drag TiresVehicle TypeDrag Racing Car, DragsterWater-ResistantYesWeight10.70" (272mm)Wheelbase12.68" (322mm)Width10.7" (272mm)