Charging Adapter Description:
Stop spending so much time charging and spend more time flying! With the JST-6 you can charge up to six lipos at one time!
Perfect for charging LiPos that fit:
- Blade 120SR
- Blade mQX
- Any other single cell battteries utilitizing JST-6 connectors
HOW THE JST-6 WORKS: This adapter is designed to allow you to connect up to six LiPo batteries with the same capacity with JST plugs to the LiPo charger of your choice. For example, if you connect three of our 3.7V 600mAh 35C lipos to the JST-6, your charger will essentially see just one 3.7V 1800mAh battery. Simply set your charger to 1S (3.7V) and 1.8A (a 1C charge rate), and you'll be able to charge those three batteries in the time it would normally take to charge just one.
Important notes: All batteries connected to the JST-6 must have the same nominal voltage and number of cells. Connecting batteries of different nominal voltages or cell counts can severely damage your batteries or charger, or even result in fire.
Do not connect a fully charged battery to a group of discharged cells. This can cause a large amount of current to flow from one battery to the others and damage the batteries or the JST-6.
Battery Pack Description:
THIS LIPO BATTERY IS A PERFECT FIT FOR THE BLADE 120 SR, MQX Quad Copter & SYMA X1!
This 1-cell Lithium Polymer 600mAh battery pack is great for tons of applications, and it fits right into the E-flite Blade 120 SR helicopter,180 QX, MQX Quadcopter & SYMA X1 with no modifications necessary! 35C continuous discharge rate of 21 amps with 42 amp bursts, and a 2C charge rate. Pack includes JST discharge connector.
Battery Dimensions:
58mm x 16mm x 6mm
Weight: 14 grams
