Axial AX90060 1/10 SCX10II 2017 Jeep Wrangler Unlimited JK 4WD CRC RTR

This is the Electric Powered, Radio Controlled, 1/10 scale           

Ready to Run SCX10 II 2017 Jeep Wrangler Unlimited CRC 4WD.           

FEATURES: Chassis: Scale steel C-channel side rails with adjustable body mount,

            adjustable bumper mounts with swaybar mounting points, mounting    

            points for optional 2-speed and servo winch, adjustable chassis    

            mounted servo system                                               

          Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar         

            driveshafts, UVJ style front driveshafts for up to 45° of steering 

            angle, full ball bearing drivetrain                                

          Transmission: AX10 three gear layout, metal motor plate, adjustable  

            ratio for high speed or competition level crawling speed           

          Slipper Clutch: Dual pad design for added surface area, 32P gear     

            pitch for high-torque applications                                 

          Motor: 35 turn, brush equipped, water resistant, integrated cooling  

            fan                                                                

          Radio: Tactic TTX300 3-channel SLT radio with TR325 Receiver,        

            programmable 3rd channel for operating two speed transmission      

            winches or lights                                                  

          Steering Servo: Tactic TSX45 metal gear, water resistant, 151oz/in   

            torque rating, dual ball bearings                                  

          ESC: AE-5L waterproof, switchable between LiPo or NiMH               

            operation with a simple jumper, Star plug battery connector,       

            built-in LED light controller (NOTE LED leads are not compatible   

            with old Axial LED light strings, or third party LED light strings 

          Spur Gear: 56T 32-pitch, plastic construction                        

          Pinion Gear 15T 32-pitch, steel construction                         

          LED Lights: Four white for head lights and turn signal markers, and  

            two red lights for tail lights                                     

          Battery Tray: Easy access front mount, accomodates batteries up to   

            1.2 x 1.7 x 5.8" (32x44x147mm) 3S, 5000mAh                         

          Front and Rear Axles: Hardened steel                                 

          AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized gear      

            ratio for reduced torque twist, optional gearing choices, one-     

            piece axle housing, increased clearance, larger load rated         

            bearings for durability, 8° kingpin axle eliminates tire scrub,    

            single piece axle housing, one-piece all metal locker, 10°         

            increment adjustments for knuckle carriers and straight axle       

            adapters, optimized gear ratio; 3.75 compared to 2.92 previously,  

            for less torque twist                                              

          Body: Painted 2017 Jeep Wrangler Unlimited CRC                       

          Wheels: 1.9" KMC XD 229 Machete Crawl wheels, molded composite       

            construction, black in color, 1.02" (26mm) wide, 2.12" (53.9mm)    

            diameter, 12mm hex                                                 

          Tires: 1.9" Nitto Trail Grappler M/T, S30 compound with large blocks 

            for excellent bite in all terrain 4.7" (119.4mm) 1.9" (48.2mm)     

            wide                                                               

          Shocks: Coil over, oil filled, steel springs, white in color         

          Suspension: Optimized suspension geometry with integrated mounts     

            upper and lower aluminum links, 4-link design reduces axle steer   

            and torque twist, and guards against suspension wrap-up in high-   

            power applications, all steel links                                

          Steering: Proper CMS geometry using 3-link setup with panhard bar,   

            45° steering angle                                                 

          Bumpers: Scale front and rear bumpers and rock sliders licensed by   

            JCR Offroad, lenses in bumpers for light kit (light kit not        

            included)                                                          

          Warranty: One year bumper to bumper limited. Axial's warranty center 

            Hobby Services will repair or replace any incorrectly made part.   

            Proof of purchase is required for Axial to honor any warranty      

            claim. Axial reserves the right to change or modify this warranty  

            without notice. This warranty does not cover damages due to normal 

            wear and tear, users' failure to perform routine maintenance, user 

            error of assembly or installation, modifications, misuse, crash    

            damage, or the addition of aftermarket parts or optional parts.    

            Note: Purchasing products from unauthorized retailers may void the 

            warranty and prevent support and service.                          

            Repair or replacement of the product by Hobby Services is the sole 

            and exclusive remedy for any loss or damages.  

INCLUDES: RTR SCX10 II Jeep Wrangler Unlimited CRC with Oil-Filled Shocks,     

            Wheels, Tires, Painted Body, Rock Sliders, Radio, ESC, Motor,      

            Decals. Waterproof Receiver Box, LED Lights and Instruction        

            Manual  

REQUIRES: Battery: 6-cell NiMH or 2-3S LiPo                                    

          Battery Charger: Compatible with selected battery                    

          Building and track equipment                                                                                 

SPECS:      Vehicle-                                                           

          Length: 19.25" (489mm)                                               

          Width: 8.9" (226mm)                                                  

          Height: 9.4" (223.4mm)                                               

          Wheelbase: 12.3" (312.4mm) adjustable with optional link kits sold   

            separately                                                         

          Ground Clearance: 3.0" (77mm)                                        

          Weight: 4.5lbs (2.04kg) approximately, with electronics              

          Optimized Gear Ratio: 3.75:1                                         

          Final Drive Ratio (FDR): 40.44, stock                                

            (33.69-54.15 with different spur/pinion gear combinations, extra   

             spur and pinion gears must be purchased separately)               

            Body-                                                              

          Length: 17.2" (438mm)                                                

          Width: 8" (203mm)                                                    

          Height: 5.5" (140mm)